Ready to Fly Proton Racer Kit - Drone, Radio and Headset!
This kit comes with a 5" Proton racer and a Taranis QX7 radio controller, and a VR-007 headset. Just add props, antenna and battery to fly!
Proton 5" Racer
This is a custom-built 5" racer using the FPV Flight Club Proton frame and the Emax F4 Magnum 2 stack with high-performance T-Motor F-40 motors and the Runcam Robin camera! Comes completely built, just add props and your antenna and connect to your radio to fly!
6 in 1 Main Board - F4 FC + Betaflight OSD + LC Filter + 5v Regulator + Blackbox + Buzzer
The heart of the flight control systems is a powerful STM32F405 MCU and MPU6000 gyro flashed with Betaflight for proven rocksteady flight stability. The integrated LC filter with 5v/3A voltage regulator means clean power for all the FC/OSD components and other attached boards such as VTX, RX and FPV Camera. Betaflight OSD with easily customizable layout of vital flight information and ability to change FC flight parameters. Blackbox flight log recorder with 16mb flash memory. On board buzzer for battery level warning or lost model finder functions.
48 Chanel 5.8ghz Switchable Power VTX Board
VTX allows for easy change of vtx channel/band via push button. Also transmit power is switchable from 25mw to 200mw. Included is a lightweight 5.8ghz dipole whip antenna or 80mm extension cable with SMA connecter for use with your own antenna.
Frsky XM 16ch Sbus Micro RX Board
Genuine FrSky XM receiver is included with 16 channels (capable of RSSI function with software update from Frsky). It possible to connect other brands of Serial or PPM via the dedicated RX pads.
Bullet 30A - 4 in 1 ESC + Current Sensor Board
The ESC system is comprised of 4 x 30A continuous Bullet ESC’s using top quality MOSFETs and running Blheli S firmware. Your choice of protocol: DSHOT, Multishot, Oneshot 125. The onboard current sensor monitors mAh consumed and pass the information to OSD for an accurate way to monitor battery level and peak power consumption.
Emax F4 Magnum AIO FPV Stack
6 in 1 Main Board
Flight controller （OMNIBUSF4 Firmware）
MPU6000 accelerometer/gyro (connected via SPI)
On-board Betaflight OSD
Integrated 5V/3A BEC
Integrated LC Filter
Dedicated PPM/ Sbus receiver input
On-board high-capacity 16mb black box flight log recorder
3 UART pads
Addressable LED pad
Channels: 48 ( Need band/channel chart )
Transmit power:Switchable 25/200mw
Antenna port :50Ω ipx ufl connector
4 in 1 ESC and Current Sensor Board
Continuous current 30A and 40A burst per motor
Supply voltage 2-4S Lipo
Silabs EFM8BB21F16G 50mhz MCU
Supports DSHOT, MULTISHOT,ONESHOT125
Top quality MOSFET (Brand)
3oz high TG PCB board
On-board current sensor
Genuine FrSky XM+ receiver
16 channel SBUS
RSSI on Channel 15
This is a lightweight feature packed reliable system and it comes in black or white color scheme. The radio includes a Haptic Vibration Feedback System which provides an alternative feedback system to the voice and sound alert warnings. This 16 channel radio has smooth ball bearing gimbals and is loaded with six switches and two knobs. It runs on OpenTX and files can be shared with the popular X9D Plus. The MicroSD card slot offers unlimited model memory options, it also has a USB port for upgrades and to connect to a PC for adjusting settings. Both sticks come with spring loaded return to center sticks, this makes changing from mode 1 to mode 2 extremely easy to set through the menu and the stick can quickly be set to a stationary throttle by unscrewing four screws and removing a spring.
One of the best features of the Taranis Q X7 is its full telemetry capability, as well as RSSI signal strength feedback. Wheel and center enter button makes navigating the backlit menu easy and precise. Equipped with an audio jack output and trainer port as well. And of course a module bay for use with JR-type modules that can be used with other protocol receivers and with the use of a FrSky XJT module. This radio can support up to 32-channels. Other features include Receiver Match, Real-Time Flight Data Logging and Super Low Latency for precision flying. Overall this Radio has the features of more expensive transmitters at an unprecedented value.
- Quad Ball Bearing Gimbals
- Receiver Match
- Audio Speech Outputs (values, alarms, settings, etc.)
- Real-time Flight Data Logging
- Receiver Signal Strength Indicator (RSSI) Alerts
- Super Low Latency
- Vibration Alerts
- Model files are compatible with TARANIS X9D/X9D Plus/X9E.
- Open source firmware OpenTx installed.
Operating Voltage Range
6~15V (2S, 3S Lipos are acceptable)
210mA maximum (both RF module and backlit are on)
Number of Channels
16 channels (up to 32 channels)
Operating Temperature Range
Backlight LCD Screen
128*64 outdoor readable LCD
16MB(extendible by TF card)
Eachine VR-007 5.8G 40CH HD FPV Goggles
Screen size: 4.3 inch
Screen resolution: 480x272
Working temperature: -20℃-80℃
Ultra-lightweight design: 256g(battery not included)
Battery weight: 24g
Power voltage: 1600mah 7.4V standard configuration(2S smart lipo battery, with power display function, supports USB 5V charging)
Antenna: 5.8G 3dB
Power dissipation: 500mA
Frequency channel: built-in 40CH 5.8GHz A/V automatic search receiver
Language choice: multilinguals can be choosed in osd menu(English, French, Italian and so on).
Small size, light weight.
Designed according to ergonomic.
Settled three-point fillet can reduce the pressure of long-time wear to the head.
High softness, ventilate and environmental sponge fit the contours of the face, more comfortable, less ambient light.
Customized eyeglass, myopia below 400° needn't to wear glasses.
Built-in 40CH 5.8GHz A/V automatic search receiver.
Standard 1600mAH 7.4V (2S) Lipo battery, with power display function, supports USB 5V charging, long life.
1 x Eachine VR-007 video glasses
1 x 7.4V 1600mAh Battery
1 x manual