Switchback PRO Longback (Crossfire)

*Switchback PRO Frame Kit

The podium owning Switchback, Optimized and Refined. Stiffer, smaller, 20×20 only.

Description

Available Configurations:

Lite:

Smallest possible arm length that can fit 5.1″ props

AKA the SmolBack

SFG:

The SFG arms are compatible with all Switchback V1 braces, SFGs, & BFGs

Longback:

The smoothest flying switchback

Can fit 6″ props but we recommend running with 5.1″

*TBS CROSSFIRE SIXTY9

What could be better than the best Crossfire receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all. 

Introducing the TBS Crossfire Sixty9, a VTx and RC receiver AIO board sporting a race-friendly, long-range capable video transmitter combined with the same on the TBS Crossfire side. Mounting holes are 20x20, but we do incldue adapters for your 30x30 stacks, and a plastic case for mounting the unit to your frame, without any stacking necessity.

Outputs 2x CRSF + 2x PWM (or 6x PWM) directly to your FC. The main JST-SH connector connects to your flight controller and video camera (or also FC for those that like the FC-OSD)

FEATURES:

• Integrated video transmitter control with long range and (team-)race functions
• Dedicated low-noise power supply for receiver and video transmitter
• Sleek 20x20 mounting form factor
• Plug&play connection and solder pads connectivity
• 3 different mounting flavors, RF tin shields, and other accessories included
• High power analog adjustable video transmitter (up to 1W with perfect cooling)
• 5V regulator bulti-in, takes up to 6S

SPECIFICATIONS

• Weight: 4.1g (board only)
• Antenna ports: 1x video transmitter, 1x R/C receiver
• Size: 24mm x 24mm
• Requires: Firmware V4.62 and above
• CRSF V3 ready
• Input voltage: 6V - 25V (2-6S) 

INCLUDES

• 1x TBS Crossfire Sixty9
• 1x TBS Crossfire Immortal-T antenna
• 1x u.FL to SMA mount (for VTx)
• 1x 30x30 heatsink / case
• 1x 20x20 heatsink / case
• 1x optional tin-shield (for added low-noise tolerance)
• 1x JST-SH x 9 connector

DOWNLOADS

• TBS Crossfire - RED Declaration of Conformity
• TBS Crossfire Manual

*Headsup | FIVE33 2207 Motor

PSA: As of 10/1/2021, all motors without MR-30 connectors will ship with the updated bells pre installed that use a Screw instead of a C clip to hold them to the stator. All bells will be backwards with motors old and new! So excited for this upgrade!

When I (Evan “Headsupfpv” Turner) and my friend Armando decided to go all-in on starting FIVE33, we set a few goals for ourselves.

We wanted to come out with THE premiere racing frame, with revolutionary features never before seen in the drone industry along with top-notch customer service and care for all of our supporters. We feel that we’ve done that.

We never planned on stopping at just that though, I recently released my prop with HQ finding the likings of hundreds of pilots! We launched our first line of merch just a few days ago! And now, finally, we are releasing a truly Top-notch motor at a never before seen price.

We will bore you with all of the technical specifications at the bottom of this description for those who truly are interested. But we did something no one else has, since starting FIVE33, we decided we were going to bring REAL top-notch quality products into price ranges the average consumer could swing.

I refuse to fly anything but the best quality products. When I am flying under the pressure of hundreds if not thousands of people watching and dollars on the line I must have full confidence in my gear which is what I feel this motor gives me. Complete confidence.  I can assure you that if I am willing to dump my own money into bringing this motor into the hands of as many people as possible, then this motor must be pretty special.

Stator: 2207
Kv:1960
Weight: 28.4 grams. That is not a typo.

Motor spec sheet below. Testing conducted with MCK prop

*Prints for Switchback PRO

Quino3D prints for the Switchback