Meteor75 Brushless Whoop Quadcopter (1S)

Sold out
$169.99
$139.99

(ELRS 2.4G)

Want a 1S whoop outdoor, around the house and yard? Meteor75 Brushless Whoop Quadcopter would be your best choice!

ELRS 2.4G Version

ExpressLRS is the most popular radio link in 2021. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. 

In order to meet the FPV polit's requirement for ELRS whoop drones, the ELRS 2.4G version Meteor75 is here. Comparison with the SPI Frsky version, what is the upgrade point on the new ELRS 2.4G version drone?

  • The FC board is the F4 1S 5A FC (ELRS 2.4G), which integrates BLHeli_S 5A ESC and SPI ExpressLRS 2.4G receiver.
  • 5.8G VTX M03 could provide highest 350mW output power. So both the radio link and FPV video link could be long enough.
  • Beside the update on the electronic components like FC and VTX, the propulsion system also upgrade. 0802SE 19500KV Motor and Gemfan 40mm 2-blades propeller combination would bring excellent flying experience on the Meteor75 drone.

 

TBS Crossfire Version

The TBS Crossfire Nano receiver with minimal T Crossfire antenna is available on the Meteor series for all CRSF users. This specific variation is only designed to be small, light, and easy to use.

This antenna is designed by Michael Anderson, produced by FPVCycle and manufactured by TBS.

Bullet Point

  • Meteor75 is the first generation whoop powered by a brand-new BT2.0 connector 450mAh battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compare with the initial PH2.0 connector
  • The power system uses the latest 1102 18000KV motors and 40mm 3-blade props, which provides pilots a stronger experience of a powerful indoor and outdoor flight
  • 1102-18000KV motors paired with durable ball bearings for increasing flight time/performance and low maintenance, while it adopts PCB connector to allow you repair it easier once it's disconnected
  • Flight controller pre-soldered the BT2.0 cable, which can provide a more stable and powerful 9A continuous current
  • Comes with an injection molding canopy, more durable and weighs only 1.5g 
  • The package comes with BT2.0 450mAh 1S lipo and BT2.0-PH2.0 adapter cable. The adapter cable is convenient for charging BT2.0 battery with your stock PH2.0 charger. Meanwhile, we have also released BT2.0 Lipo Charger Board to charge 6pcs battery at the same time

     

    Specification

    • Item: Meteor75 Brushless Whoop Quadcopter
    • FC&ESC: F4 1S AIO FC / F4 1S 5A FC (ELRS 2.4G)
    • Frame: Meteor75 Frame
    • Motors: 1102 18000KV motor / 0802SE 19500KV Motor (only for ELRS 2.4G version)
    • Props: 40mm 3-Blade Propellers (1.5mm Shaft) / 40mm 2-Blade Propellers (1.0mm Shaft)
    • Camera: C02 Micro Camera
    • Receiver Option: Frsky XM  / Futaba S-FHSS / TBS Crossfire / ELRS 2.4G
    • VTX: Integrates 25mW VTX / M03 25-350mW VTX (only for ELRS 2.4G version)
    • Battery: BT2.0 450mAh 1S 30C Battery
    • Flight time: 3-4min
    • Weight (Without Battery): 29.3g / 24.0g (ELRS 2.4G)

    Flight Controller

    We used to use the classical F4 1-2S AIO Brushless FC on the Meteor75 drone. Why not the lighter F4 1S AIO FC board? Updated with the new FC, which integrates the 25mW VTXno need for soldering, easy to install. Meanwhile, it supports external receivers like TBS Crossfire, Frsky XM+ and Spectrum DSMX etc.

      Injection Molded Canopy

      Since Meteor75 whoop drone, we will use an injection molded canopy, which is only 1.5g with a camera holder. Of course, much durable than the original canopy.

      Comes with a super Mini 5.8GHz FPV Transmitter + 800TVL C02 Camera+ RG178 Antenna, features 6 bands and 37 channels on the 5.8GHz band with Raceband, perfect for Meteor75.

      Motors

      1102 18000KV motors have a great balance between weight and power on this tiny 75mm 1S whoop drones. Only 2.9g with connectors. With the high 18000KV value, it could have a great punch power even only 1S battery.  Also, it adopts PCB connector to allow you to repair it easier once cables disconnected.

        BT2.0 Connector

        BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has a longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.

        Meanwhile, we hold a Giveaway Event- BT2.0 connector for everybody. 

         Much more choices of BT2.0 series accessories. 

        We know some pilots might have a question about how to deal with the old PH2.0 1S battery. So we provide some accessories like BT2.0 Power whoop connectors for those people who wanna convert the PH2.0 connector to BT2.0 connector. 

        • BT2.0 Connectors 
        • BT2.0 1S Whoop Cable Pigtail
        • BT2.0-PH2.0 Adapter Cable

        Highly recommend the below products with BT2.0 connectors or cables. BETAFPV will collaborate closely with more brand manufacturers in the future, in order to bring better service and experience to customers.

        • BT2.0 450mAh 1S Battery
        • BT2.0 300mAh 1S Battery
        • BT2.0 Battery Charger and Voltage Tester 
        • BT2.0 Series Quadcopters
        • 6 Ports 1S Battery Charger & Adapter
        • Other Brand Chargers & Batteries with BT2.0 port

              FAQ

              Note: Now the default flight controller firmware for the Meteor75 ELRS version is updated to Betaflight V4.3.0 Official version, which supports ELRS V2.0. For the ERLS V1.0 version, if you need to update it for supporting ERLS V2.0, please refer to the link below.

              Package

              • 1 * Meteor75 Brushless Whoop Quadcopter (1S)
              • 2 * 450mAh 1S 30C Battery with BT2.0 connector
              • 1 * BT2.0 Battery Charger and Voltage Tester
              • 1 * TypeC USB cable
              • 1 * Customized Carry Case
              • 1 * Spare 40mm 3-blade props (1.5mm Shaft) / Spare 40mm 2-Blade props (1.0mm Shaft)
              • 1 * Screwdriver

              You recently viewed

              Clear recently viewed