Hummingbird Whoop (FrSky)

Save $38.34
$115.99
$77.65

Hummingbird Flight Controller + Camera Set & Receiver Combo


The next generation of silverware flight controllers is here, we give you the Hummingbird Flight Controller! The first Silverware FC to include On Screen Display and VTX Control functions.

The Hummingbird FC running our custom tuned Silverware is the ultimate FPV Brushed Angle Racer on the market!

The Hummingbird Flight controller features a built-in VTX with 1mw - 25mw switchable power as well as adjustable On Screen Display functions including changing of the VTX bands and channels. Simply solder on a receiver of your choice in FrSky  to make your board ready to fly (included in the Receiver Combo)

Special thanks to Patrick Clarke (Mr. Mockingbird) & Silverware Developers Travis Schrock (NotFastEnuf) & Silver13

Radio Channel Mapping:

The channel mapping is critical for making your Hummingbird fly, some radios will have different mapping (ex: Taranis X9D is A.E.T.R., while Taranis QX7 is T.A.E.R. even though they are both FrSky Protocol) Depending on which Protocol your hummingbird has been flashed with, you will need to change the order on your radio as this is not editable on the hummingbird firmware. See the list below for proper channel mapping:

  • FrSky Radios - A.E.T.R. (Aileron - Elevator - Throttle - Rudder)
  • Spektrum Radios - T.A.E.R. (Throttle - Aileron - Elevator - Rudder)

Crossfire Settings:

  • Receiver RSSI must be set to channel 9 in crossfire lua script on radio/module in order to correctly see OSD RSSI.

    Latest Hummingbird Firmware:

    All Hummingbird Flight Controller Boards are the same, the only difference is the firmware that comes flashed on them. You can flash any provided protocol hex on your Hummingbird FC regardless of what it was shipped with. When flashing please always do a full erase first and then flash. You can purchase the flashing cable 

     

    Specifications: 

    • F031K6 Processor - Silverware Firmware 
    • MPU6050 Gyro
    • 4 x 30A Mosfets (Pulsed)
    • NewBeeDrone OSD (On Screen Display) & VTX Control
    • Built-in VTX 1mw - 25mw switchable power
    • Built-in Barometer 
    • Battery Monitor
    • JST PH-2.0 Nectar Connector Power Lead
    • Programming Port Available
    • Custom tune by Mr.Mockingbird (Team Pilot Patrick Clarke)

    Whats Included: 

    • Hummingbird Flight Controller with on-board VTX
    • 5 Mounting Grommets
    • 5 Mounting Screws
    • 5 Motor Wire Rubber Bands
    • Receiver Pin Adapter
    • BeeEye Camera & V2 Canopy 
    • Beeceiver of your choice FrSky v1 

    Cockroach Super-Durable Frame

    Frustrated with constantly fixing struts and breaking frames, we set out to find something better...and more colorful! 

    We worked with a number of manufacturers and after numerous prototypes and revisions, we are proud to introduce the Cockroach Super-Durable Frame for Tiny Whoop style quads.

    Traditional Looks and Geometry maintain those flight characteristics you are used to and ensure easy compatibility with the Beebrain as well as most other popular flight controllers.

    Lightweight and Durable. We found a more forgiving and resilient material that doesn't sacrifice in weight or stiffness. Struts and other key support components have been redesigned to distribute and dissipate stress from crashes and falls. 

    Easy and Inexpensive. None of this is any good if its super difficult to use and super expensive. So we made sure we set out to make something affordable. Key tolerances have also been fine tuned to make installation and removal much easier. 

    6x15mm 19500KV Brushed Motors (2CW+2CCW)

    Do you value performance over flight time and motor life in a crazy way? These are your motors. When you try them you'll know why I recommend them. The floor drops. the Tiny Whoop shrinks into the sky. Tiny and fast go so well together.

    SPECIFICATION

    • Motor Diameter: 6mm
    • Motor Length: 15mm
    • Shaft Diameter: 0.8mm
    • Cable Length: 56mm
    • Weight: About 1.8g
    • Motor wire: Clockwise Motor(With Red Blue), Anti-clockwise Motor(With Black White)
    • Option: With 1.25mm JST Plug
    • Just fit for Blade Inductrix, Tiny Whoop, Nano QX quadcopter

    31mm 4-blade Micro Whoop Propellers

    These 4-blade props are great alternative to the stock propellers! These work terrific and cost a lot less than the original props.



    SPECIFICATION

    • Product material: Plastic
    • Inner diameter:  0.8mm Shaft
    • Height: 7.2mm
    • Weight (2CW+2CCW): 1.00(g) = 0.035(oz)

      PACKAGE

      • 2 * CW 4-blade 31mm Props
      • 2 * CCW 4-blade 31mm Props

       

      Total Package Included:

      1 1s Brushed Whoop FrSky

      *Batteries not included

      You recently viewed

      Clear recently viewed