Beta75X Lumenier Edition Glow in the Dark
F4 2S Brushless Flight Controller and ESC
Update of the F4 2S Brushles FC and ESC
- The F4 2S Brushless FC is now upgraded to V1.2. It can support programmable LED like WS2812 etc.
- The 2S ESC board is updated from 6A to 10A. Definitely will give your 2S whoop drone much more POWER.
This F4 flight controller and ESC are customized for the 2S whoop drones Beta65X and Beta75X. It will turn the brushless whoop drone into a beast.
SPECIFICATIONS OF FC
- CPU: STM32F405 (Overclock to 240MHz)
- Six-Axis: MPU6000
- Size: 26mm x 26mm, whoop mounting pattern
- Firmware version: Betaflight OMNIBUSF4SD (OBSD)
- OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
- TX02、RX02 ports is available, so that it could support TBS micro receiver
- RSSI ports is available
- Buzzer solder pads
- Support programable LED like WS2812 etc
- Weight: 2.7g
CONNECTION BETWEEN FC & CAM
SPECIFICATIONS OF ESC
- Support BLheli/BLHELI_S suite Pass-through ready
- Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
- Input voltage: 2S lipo
- Cotinue current: 12A
- Peak current: 15A
- Firmware: BLHELI_S
- Processor: SILABS EFM8BB21F16G阿
- Motor Connectors: 1.25mm header pins connector
HOW TO ASSEMBLE FC & ESC
RECOMMENDED RECEIVER CONNECTION
All the ports are available on this board. So that you could connect any receiver you want on the board. For example.
- Frsky XM/XM+ Receiver
- TBS receiver
- DSMX receiver
1103 Brushless Motors
Lightest 1103 motors in the world. Only 3.2g with connector. This motor is customed for Beta75X 2S Whoop drone. A 1.5mm header pins connector is include. So no soldering needed, just plug and play.
- 1103 11000KV brushless motors is customed for 2S brushless whoop drone.
- Fit with 1735, 1935, 2030, 3020 propellers
- Shaft Diameter: 1.5mm, Weight: 3.2g
- Compatible with 2S lipo battery
- Propellers: 40mm 4-blade props (1.5mm shaft hole)
- Frame: Beta75X frame
- FC & ESC: BETAFPV 2S Whoop FC cube
- Height: 14mm
- Weight: about 3.2g
- Shaft: φ1.5mm
- Motor Mount Holes: M1.6 on Dia 8.5mm
- KV (rpm/V): 11000
- Voltage: 7.4V, 2S Lipo battery
- Plug: Micro JST-1.25 3-pins connector
Beta75X Lumenier Edition Glow in the Dark Whoop Frame
This Beta75X Lumenier Edition frame is a custom 75mm 2S whoop drone, now glow in the dark! Pair with glow in the dark propellers and canopy, to make a completely glow in the dark drone!
This frame natively supports 110x motors. Also, it has a customized battery slot to support a 2S battery. The FC mounting columns still match the whoop style FC boards. It is durable, yet at the same time, light enough for a to let those 2S batteries shine and makes this whoop a beast!
In default, the battery slot is designed for 2S 350mAh battery. If already have many 1S whoop style batteries and want to use them on this frame, what shall we do? As shown below, with the help of form adapter, 2pcs 300mAh Lipo HV 1S whoop style batteries are inserted in the slot suitably.
Don't forget to get a double PH-JST 2.0 connector power cable here if you will be pairing your 1S batteries.
- Propellers: 40mm 4-blade props (1.5mm shaft hole)
- Motors: 110x brushless motors, like 1103 11000KV motors
- Batteries: 350mAh 2S Lipo HV batteries
- FC & ESC: BETAFPV 2S Whoop FC Stack
- Material: White glow in the dark plastic
- Diagonal motor to motor distance: 75mm
- Motor mounting hole: for 110x series motors
- FC mounting hole: fully compatible with whoop style FC board mounting pattern, 26mm x 26mm
- Battery slot size: 11.5x16mm, for BETAFPV 300/350mAh battery
- Weight: 8.5g
Lumenier Edition Glow in the Dark Canopy
A replacement glow in the dark plastic canopy from BETAFPV made for the Lumenier Edition Beta75X. Fits the Beta/65/75 and may work for other whoop sized quads. Protect your internals and secure your FPV camera in place with the lens slot.
- Color: White / Glow in the dark
- Material: Plastic
- Compatible: Beta65/75
Z02 AIO Camera 5.8G VTX
Z02 AIO camera VTX is the newest video transmitter by BETAFPV. It has 2 great improvement since. First, switchable power output between 0mW, 25mW and 200mW. Second, Smart Audio is included and pilots could control the VTX via your radio transmitter.
- Switchable power includes 0mW, 25mW and 200mW.
- Smart Audio function is included in this AIO Z02 camera. The flight controller can communicate with the video transmitter using the audio line in. It allows the flight controller to know what frequency the vtx is using, and to change it.
- Fixed 20° tilt camera mount. At this angle the pilot can still see everything ahead in full-blown fast forward flight.
- Dipole whip high sensitivity antenna
- Output power: 0mW, 25mW and 200mW (Adjustable)
- Supply Voltage: 2.9-5.5V
- Size : 27*17*14 mm
- Weight: 4.7g
- Antenna: Omnidirectional ANT
- Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
- TV System: NTSC
- Field of view: 100-120 degrees with 1/4 lens.
HOW TO CHANGE FREQUENCY & CHANNEL & POWER
- Frequency group A~F selected still touch up to 2 secs
- Channel ch1~ch8 selected with short touch.
- Power switch with long touch up to 5 secs.
In default, the connectors of the Z02 is compatible with BETAFPV FC boards like F3 V2, F4 etc.
FrSky XM Plus Ultra Mini Receiver ONLY
- Weight: 1.6g
- Number of Channels:Up to 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC)
- Operating Voltage Range:3.7~10V
- Operating Current:30mA@5V
- Operating Range:FULL range
- With RSSI output on board:Analog 0~3.3V
- Firmware Upgradeable
- Compatibility:FrSky D16 mode
BETAFPV 40mm 4-Blade Whoop Propellers (1.5mm Shaft - Lumenier Edition Glow in the Dark)
These glow in the dark 40mm props have a shaft hole of 1.5mm, made to fit 110x motors perfectly. It is the stock prop for BETA75X Lumenier Edition 2S Whoop drone.
Recommended frame and motors for these propellers
- BETA75X Lumenier Edition Glow in the Dark Frame
- 1103 11000KV motors
- Product Material: ABS
- Shaft Diameter: 1.5mm Shaft
- Diameter: 40mm
- Height: 7.2mm
- Weight (2CW+2CCW): 2.4g
- 2 * CW 4-blade 40mm Whoop Props (1.5mm Shaft Hole)
- 2 * CCW 4-blade 40mm Whoop Props (1.5mm Shaft Hole)
BETAFPV LED Board
- LED: WS2812B-5050
- Size: 23.5mm × 11.4mm
- Voltage: 3.3～5.2V DC
- Support: Betaflight / Cleanflight
- Frame: Beta 75X
- Weight: 1.0g
- Wire Material: Silicone wire coated with tin
- Wire Length: 65mm
- Wire Color: Red, Yellow, Black
HOW TO CONNECT LED BOARD TO FC
Go to the CLI tab in Betaflight GUI and copy all the commands below to enable the LED_STRIP, but the TX1 port will be invalid.
resource SERIAL_TX 1 NONE
resource LED_STRIP 1 NONE
resource LED_STRIP 1 A09
If the LED still doesn’t work when you set LED_STRIP, please put your FC in DFU mode and reflash. Note that the 5v pad on the led strip can be soldered on the +5v or the Buzz+ of the FC (see diagram).
Note that the 5v pad on the led strip can be soldered on the +5v or the Buzz+ of the FC (see diagram).
2S Whoop Cable Pigtail (XT30)20AWG
This power cable with XT30 connector is just for 2S whoop drone. Pilots could still use normal 2S batteries on Beta65X or Beta75X without lose of Amp on the cables. So get more punch on power.
The material of power cable is silicone. Thickness is 20AWG.
- Connector : Male XT30 power cables
- Length: 55mm (Not included the plug)