Brushless Tiny Whoop

Save $30.00
$129.99
$99.99

Custom Brushless Whoop with no soldering!

BETAFPV C01 FPV Micro Camera

The BETAFPV C01 Micro Camera is a lightweight camera that is made to fit weight-sensitive micro whoop drones, like the Meteor65, Beta65S, Beta85 Pro 2,  and the HX100SE Toothpick Quadcopter! The C01 Micro Camera features an adapted 1/4'' CMOS sensor, a 2.1mm lens with 800TVL resolution, and excellent latency while minimizing the weight to 1.4g.

This micro camera comes with a micro canopy to protect your camera from a harsh crash.

Plug-N-Play

C01 camera features a JST0.8 connector, special design in plug-and-play, makes it easy to install without soldering. Suitable for BeeBrain flight controllers.

Features

  • Miniature, and lightweight design, weight at only 1.4g. Best match with 5.8G A01 VTX on micro whoop drone.
  • 800TVL resolution and 1/4" CMOS sensor ensure a high-quality and clear image
  • Global WDR camera, 4:3 aspect ratio, shoot clear dynamic image even in low light condition
  • 2.1mm lens, FOV 160° beyond the wide-angle for recording more wide and beautiful scenes
  • The package comes with an injection molding canopy, more durable, which is the best combo with C01 cam

Specifications

  • Item: C01 Camera
  • Image Sensor: 1/4" CMOS Sensor
  • Horizontal: 800TVL with Global WDR
  • Signal System: NTSC
  • Lens : 2.1mm(M8) FOV 160°
  • S/N Ratio: >50db
  • Electronic Shutter Speed: Auto
  • Auto Gain Control (AGC): Auto
  • Min. Illumination: 0.01Lux@1.2F
  • D-WDR: Auto
  • Day/Night: Color
  • Power: DC 3-5.5V
  • Current: 110mA@5V / 120mA@3.3V
  • Housing Material: ABS
  • Dimension: 11*11mm
  • Net weight: 1.4g

Includes

  • 1 x C01 FPV Micro Camera
  • 1 x Injection Molded Canopy
  • 1 x 1/4'' Camera Mounting hardware

0603 1S Brushless Motors (19000KV)

These motors are the stock motors for the Beta65 Pro 1S brushless drone.  

Really not recommend the 0703 motors with a 65mm frame ( like Beta65 Pro frame or BWhoop B06 etc). Why? The combo of 0703 motors and 31mm props (for 65mm frame) has a really low efficiency. Really not power enough. For the 65mm 1S brushless drone, high recommend these 0603 motors.

Here is the testing result of different motors and frames combo.

  •  Throttle value means the position when the drone hovers in the air.
  • Flying time is the time from OSD voltage value 4.3V->2.8V.
  • All tested with 4-blades props. 31mm props or 40mm props.
  • All throttle values are tested on full charged 550mAh batteries.
  • The KV value of 0703/0603 motors are both 15000KV.

SPECIFICATION

  • Plug:Micro JST-1.25 3-pins connector
  • Height: 16.2mm
  • Width: 9mm
  • Weight: 1.6g ( with connector)
  • Shaft: φ1.0mm
  • KV (rpm/V): 19000KV 
  • Voltage: 3.7-7.4V
  • Battery: 1S lipo battery (2S is not recommended)
  • Load Current: 1.8-3.8A
  • Pull: 23-40g
  • Power: 6.7-28W
  • Efficient: 3.4-1.4g/W
  • Usage: for 1S brushless multirotor like Beta65 Pro or BWhoop B06 etc

PACKAGE

  • 4 * BETAFPV 0603 19000KV Brushless Motors
  • Some M1.6x4 screws (Fit for Beta65 Pro and Beta75 Pro frame)

F4 1S AIO Brushless Flight Controller

F4 1S AIO FC(SPI Rx) integrates 4 components as F411 FC, 5A ESC, 25mW VTX and SPI receiver. It is ultralight only 3.92g and still maintains an amazing performance capability, which makes it become your best choice to run with a 1S brushless quad! 

SPI Frsky D16 FCC

Meteor65 Micro Brushless Whoop Frame

Gemfan 1220 1.2x2x4 31mm 1mm Hole 4-blade Propeller

You recently viewed

Clear recently viewed