Designer Beta65S Chameleon Combo (Drone, Goggles, & Radio)

Sold out
$175.90

Designer Beta65S Chameleon

Here it is, the limited-edition Beta65S drone. The Beta65S has 1 huge improvement based on Beta65 drones.

  • Motors: 6x15mm -> 7x16mm brushed motors
  • Batteries are not included

LiteRadio 2 SE Radio Transmitter is the upgraded version based on LiteRadio 2 and comes with huge improvements.

  • Built-in 1000 mAh 1S battery, LiteRadio 2 SE increases the endurance to 8 hours.
  • Updates with BETAFPV self-developed LiteRadio System. Pilots can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter.
  • Supports the Frsky / Futaba / Bayang, pilots can easily change Futaba, Frsky D8, Frsky FCC D16 and Frsky LBT D16 mode via the radio transmitter.
  • Comes with 100mW transmitting power, LiteRadio 2 SE brings a wider operating range.


    Bullet Point

    • LiteRadio 2 SE upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter, which is more convenient for the beginner racer to operate.
    • Equipped with a built-in 1000 mAh 1S battery, LiteRadio 2 SE can use up to 8 hours, bringing an excellent endurance performance. 
    • Comes with a built-in charging module, LiteRadio 2 SE can support USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged(when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly. 
    • Compared with the LiteRadio 2, LiteRadio 2 SE has a larger transmitting power that can reach 100mW, bringing a wider operating range.
    • Adopted the rubber coat, LiteRadio 2 SE is ergonomic and has the shape of a gaming controller. It's comfortable to hold, and the anti-slip texture on the handles allows for a solid grip.
    • This radio transmitter acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE.
    • LiteRadio 2 SE transmitter has been equipped on the Ready-to-Fly FPV whoop racing advanced kit 2 and FPV whoop racing starter kit 2. It is one of the easiest ways to get into the hobby

      Specification

      • Item: LiteRadio 2 SE
      • Color: White
      • Frequency Range: 2.4G (2403MHz-2447MHz)
      • 2.4G System: NRF24L01 or CC2500
      • Channel: 8
      • Support Protocol: Bayang / Futaba S-FHSS / Frsky FCC D16/ Frsky LBT D16 / Frsky D8
      • Power: ≤100mw
      • Adapted Drone Type: Multirotor
      • Support USB Charging / Firmware Update
      • Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration
      • LED Light: Green-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal
      • Battery: Built-in 1000mAh 1S Battery
      • Charging Connector: TypeC

      Comparison of LiteRadio 2 SE and LiteRadio 2

       LiteRadio 2 SE LiteRadio 2
      System Customized LiteRadio System Opensource OPENTX
      Power Built-in 1000mAh 1S Battery Removable 350mAh 2S Battery
      RF Power 100mW 80mW
      Working Time 8 Hours 3 Hours
      Protocols Frsky FCC D16/Frsky LBT D16/Frsky D8/Futaba S-FHSS, Bayang Frsky FCC D16/Frsky LBT D16 /Frsky D8, Bayang
      Joystick Calibration Yes No(Could with OpenTX Companion)
      Firmware Update Yes No

      How to switch the protocol

      To change protocols (Frsky FCC D16, Frsky LBT D16, Frsky D8, or Futaba S-FHSS), you have to power it off first, then press and hold the bind button while you power it back on. After that, the flash times of the red LED before buzzer alarms will change, and it will indicate which protocol it is on. 
      LED Status Protocol Version
      Flash Once Frsky FCC D16
      Flash Twice  Frsky LBT D16
      Flash Three Times  Frsky D8
      Flash Four Times Futaba S-FHSS

      Diagram of LiteRadio 2 SE

        FAQ

        • Manual for LiteRadio 2 SE Radio Transmitter
        • How to replace the gimbals of Literadio 2 SE?
        • For any questions about joystick calibration of the Literadio 2 SE transmitter, please watch the following video to know more.

          Package

          • 1 * LiteRadio 2 SE Radio Transmitter
          • 1 * User Manual

            VR02 FPV Goggles

            BETAFPV VR02 FPV Goggles - A First-Person-View Goggle that is specially designed for FPV starters. Built-in antenna and only 3 operation buttons, the VR02 goggle is extremely easy to operate. With 4.3 inches 800*480px high brightness LCD, you can experience a bright world without warped and blurred images.

            Bullet Point

            • BETAFPV VR02 FPV Goggles is specially designed for FPV starters. With the built-in antenna and 3 compact operation buttons, the VR02 Goggles maintains a 300g lightweight and easier to operate.
            • With 4.3 inches 800*480px HD high brightness LCD, which is specially tuned for FPV racing or Model airplanes. 
            • Upgraded the Frequency sweep function and the fast frequency auto-search function(Only 2.5 seconds fast frequency search), pilots can easily find a stronger Band to get a better flight experience.
            • Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly.
            • Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand.
            • Come with an advanced auto-searching function and show you the working frequency on screen.

            Specification

            BODY

            • Dimension: 126x143x86.3mm
            • Weight: 300g with 2hr 2000mAh battery
            • Belt: Three-Ways adjustable belt

            SCREEN

            • screen size: 4.3 inch
            • Screen resolution: 800*480 px
            • Screen brightness: 300cd/m2
            • View Angle: 55°

            JACK

            • Type-C Charging
            • Voltage: 3.7V, the device operating current of 500mA@3.7V
            • Current: 500mA

            BATTERY

            • Built-in 3.7V/2000mAh high-capacity polymer battery, LED turn on while charging. When charging is completed, the LED will turn off.
            • Each full charge revive is around 2 hours working time

            Small and Portable

            Comes with BETAFPV patented design, VR02 FPV Goggles cleverly uses optical reflection, bringing a more practical structure. It effectively reduces the goggles' volume, making the goggles become extremely small and portable, greatly enhances the flight experience.

            Band and Channel Selection

              CH
            CH 1
            (MHZ)
            CH 2
            (MHZ)
            CH 3
            (MHZ)
            CH 4
            (MHZ)
            CH 5
            (MHZ)
            CH 6
            (MHZ)
            CH 7
            (MHZ)
            CH 8
            (MHZ)
            GROUP
            A
            5865
            5845
            5825
            5805
            5785
            5765
            5745
            5725
            B
            5733
            5752
            5771
            5790
            5809
            5828
            5847
            5866
            E
            5705
            5685
            5665
            5645
            5885
            5905
            5925
            5945
            F
            5740
            5760
            5780
            5800
            5820
            5840
            5860
            5880 
            R
            5658
            5695
            5732
            5769
            5806
            5843
            5880
            5917
            L 5362 5399 5436 5473 5510 5547 5584 5621
            • BETAFPV VR02 FPV Goggles has a frequency sweep function and a fast frequency auto-search function, it will help pilots find a stronger Band to get a better flight experience.
            • The frequency sweep function can display the occupancy status of each channel in the current space so that pilots can fly with a better Band and enhance the flight experience.

            How to use the frequency sweep function?

            After powering on, short press the "S" button to enter the sweeping interface, as shown below. Pilots can change the Band via the "Band+" and "Ch+" button.

            Band Status Indicator

            Green 0<RSSI<20, not occupied
            Yellow 20<RSSI<70, there is a drone occupying the Band far away, or there is interference
            Red 70<RSSI<99, occupied
            White current Band (highest RSSI in the sweep result)

            How to use the fast frequency search function?

            After powering on, press and hold the "S" button for 1 second to start the frequency auto-search. The frequency auto-search process is 2.5 seconds. After the frequency auto-search is over, it will beep twice and jump to the corresponding Band of the drone.

            Operation Instructions

            KEY
            • Power On/Off
            Default mode, Flick to the left to turn off, and to the right to turn on, the screen will light up after a normal boot.
            • Band+
            Default mode, Short press for Band+ option A, B, E, F, R, L cycle selection.
            • Search

            Default mode, After powering on, short press the "S" button to enter the sweeping interface. Press and hold the "S" button for 1 second to start the frequency auto-search. 

            • CH+
            Default mode, Short press for CH 1~8 cycles.



            Package

            • 1 * BETAFPV VR02 FPV Goggles
            • 1 * Adjustable Headband

            You recently viewed

            Clear recently viewed