Fullspeed Toothpick Racing Drone

Save $50.00
$169.99
$119.99
Fullspeed Toothpick Racing Drone

Product name:
Toothpick Frame KIT
Product Weight: 9g
wheelbase: 120mm

Thickness of bottom plate: 1.5mm
Material: Carbon Fiber + 3D Print canopy

Recommended Configuration:

Battery: 2-3S
Props: 65mm

SucceX Micro F4 Flight Tower System 16x16mm

SucceX F4 Flight Controller

-STM32F411
-Input voltage 2-4S LIPO
-Gyro: MPU6000
-2x UART ports
-4x motor outputs
-OSD inbuilt
-No Blackbox FLASH
-BEC 5V 2A cont.
-Size: 21mm*21mm
-Mounting holes: 16*16
-Weight: 2.5g
-BF target : MATEKF411

SucceX Micro 12A Brushless ESC

-Firmware: BlheliS
-Input voltage : 2-4S LIPO
-Continuous current: 12A
-MCU: BB21F16G
-BEC : None
-ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
-Size: 23mm*21mm
-Mounting hole 16*16mm
-Weight: 2.7g

Runcam Racer Nano
Crossfire RX
Lil'Floater 1103 8000kv motors
  • 1103 8000kv (3s 12a+ esc required) 
  • 4.8 grams each (Including plug w/ 50mm wire) 
  • 3 pin 1.25mm pitch picoblade connector (works with 26x26 brushless whoop FC’s/ or cutoff and direct solder)
  • 50mm long silicone wire 
  • 1.5mm diameter, 4mm tall shaft with 2x M2 screw holes for prop mounting (will work with press on props, but we don’t recommend it) 
  • 9mm M2 bolt pattern (6mm bolts included with kit)
  • Prop screws included (Please check screw to stator clearance before installing props)

SUGGESTED PROPELLERS:

  • HQ T2x2.5x3
  • HQ T2.5x3.5x3
  • HQ T3x3 (2s only)
  • Lumenier 2.2x3
  • 65mm props  


You recently viewed

Clear recently viewed