NytFury ARC One 5″
NytFury ARC One 5″ Race Frame (Stretch X)
Pods are printed, black with red fin.
NytFury ARC One 5″ race frame. Available frame configuration of Stretch X
Frame features interlocking 5mm thick arms.
FlightOne RevoltOSD Lite flight controller
The FlightOne RevoltOSD Lite flight controller is the most advanced, performance driven, flight controller ever designed. The Revolt uses a powerful F405 MPU, accompanied with the High Speed Invensense 20602 gyro, allows it to take full advantage of FlightOnes efficient code to run at 32KHz for the best Performance possible.
Spedix GS35 35A 4-in-1 2-4s BLHeli_32 Dshot ESC
Spedix has brought the latest in ESC technology to it's 4-in-1! The GS35 4-1 ESC is a 4-in-1 version of its GS35 ESC series. Capable of the extremely quick DShot 1200 protocol, the GS35 is, technically speaking, the best performing 4-in-1 ESC on the market (along with anything else DShot 1200 capable). This is also one of the most reliable manufacturers of FPV ESC's today.
- Size: 37mm x 41mm x 5mm
- Mounting Holes: 30.5mm x 30.5mm
- Weight: 11.8 grams (no wires)
- Firmware: BLHeli 32 bit
- Amps: 35Amp/45Amp Burst
- Supports Oneshot125, Oneshot42, Multishot, DSHOT600, DSHOT1200
- 1x GS30 2-4s 30A BLHeli_32 Dshot
FrSky XM Plus Ultra Mini Receiver ONLY (Access)
- Weight: 1.6g
- Number of Channels:Up to 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC)
- Operating Voltage Range:3.7~10V
- Operating Current:30mA@5V
- Operating Range:FULL range
- With RSSI output on board:Analog 0~3.3V
- Firmware Upgradeable
- Compatibility:FrSky D16 mode
EMAX RS2306 Racing Series Brushless Motor (Black)
The RS2306 was designed to set a new standard of power and response for pilots seeking the ultimate in flight performance. With nearly twice the level of thrust of the original Red Bottom, the new RS2306 sets the bar even higher by pushing 2kg of thrust with 5045x3 propeller on 5S or 6045x3 on 4S.
Latest design language used in RS2205-S have been carried over to the RS2306.
Lighter bell, hollowed steel shaft, bigger bearings, lower profile, and kept the overall diameter just 0.4mm wider than RS2205-S!
-2kg Thrust from a 2306 class motor!
-Larger Stator for smooth, responsive power.
-BEEFY 4mm Hardened and Tempered Hollow Steel Shaft: Breaking shafts are a thing of the past.
-0.15mm High Silicon-Steel Laminations: Higher volume of silicon increases electrical resistance in the lamination, reducing eddy-currents within the system (Translates electrical energy into mechanical energy more efficiently.).
-High quality 4mm Inner Diamter Steel Ball Bearings.
-1.8mm N48SH Arc magnets (thinner and lighter which allow lower mass on the outer portion of the bell, resulting in faster acceleration. Less energy lost and more power delivered to the propeller).
-Special Edition Matte White Bell.
-Hex head bell fastener for easy servicing or bell replacement.
-PROPLOCK base for future performance-matched propellers: This anti-slip design locks in the propellers on to the motor to prevent Prop slippage during the hardest obstacle strikes.
-34 grams - Contrary to what most pilots say about motor weight Lighter is not always better. In this class of a motor that pushed 1,000s of grams of thrust, 34g is the absolute minimum without compromising structural integrity.
|Voltage (V)||Propeller||Current (A)||Thrust (g)||Power (W)||Efficiency||Speed (RPM)|
Shipping Weight 120.0000
Max Current (A) 58.00
Resistance (mh) -
Max Voltage(V) 17.00
Power (W) 915.00
Shaft A(mm) 5.00
Length B (mm) 17.10
Diameter C(mm) 28.30
Can Length D(mm) 8.00
Total Length E(mm) 30.10
Gemfan Hulkie 5055 Durable 3 Blade
- Item name: Hulkie 5055 propeller
- Size: 5.0x5.5 inch
- Material: PC
- Mounting hole: 5mm
- Paddle size: 16.2mm
- Hub thickness: 7.5mm
- Weight: 4.90g
- Suitable for 2205-2306 motor
- 2x Hulkie 5055 3-blade propeller CW
- 2x Hulkie 5055 3-blade propeller CCW
Camera Foxeer Predator Falkor