Meteor65 Brushless Whoop Quadcopter (1S) Kit

Save $50.00
$299.99
$249.99

*Meteor65 Brushless Whoop Quadcopter (1S)

(Frsky FCC)

WINTER IS COMMING! METEOR65 IS READY! 

Meteor65, a leading 1S whoop WINTER TIME drone. It's equipped with the BT2.0 connector, lightest F4 1S FC and 0802SE 19500KV motors. With the stronger and powerful dynamical system, you’ll immediately notice how fantastic the 22.84g Meteor racer is at takeoff. It feels amazing as you hover around indoors, then let it rip and haul around the house! 

What's more, Meteor65 comes back on 30th March as a kit,  it is with abundant accessories of 2 lipo batteries, a BT2.0 charger & tester, extra 1 set of props, 1 screwdriver and a portable bag. It is easy to use and at a reasonable price! Also, the camera angle has been adjusted to 30°, which brings you a greater flying experience!


The performance of a 65mm 1S brushless drone has gone up a new level this winter. What is your exception for this drone? Aggressive power and faster speed, or longer flying time? Here is the comparison of different motors.

0802-22000KV 0802-19500KV 0603-19000KV 0603-16000KV
Flying Time 1:30-2:00min 3:30-4:00min 4:10min
 Speed & Power Ultra Insane Insane Insane


Thanks for the feedback and advice from Nate Payne and Michael Huddleson. Right now you could choose these spare motors like 0802SE 19500KV Motor or 0603 Motors 19000KV / 16000KV to experience the different flying of our Meteor65.

Bullet Point

  • Meteor65 is the first generation whoop drone powered by a brand-new BT2.0 1S battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compared with the initial PH2.0 connector. 
  • Flight controller pre-soldered the BT2.0 cable, which can provide a more stable and powerful 9A continuous current and 15A burst.
  • For minimizing weight and optimal performance, it applies the perfect lightest combo with F4 1S AIO FC and C02 camera. 
  • By using the latest 0802SE 19500KV motors and 31mm 3-blade props, this kit provides you a completely different experience of a powerful indoor flight. 
  • Meteor65 lower profile frame is reduced 0.75g to 3.08g only. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.
  • The package comes with 2 lipo batteries, a BT2.0 charger & tester, an extra 1 set of props, 1 screwdriver, and a portable bag.  Meanwhile, we have also released a BT2.0 Battery charger for your needs.

Specification

  • Item: Meteor65 1S Brushless Whoop
  • Weight: 22.84g (without battery)
  • FC&ESC: F4 1S AIO FC / F4 1S 5A FC (ELRS 2.4G)
  • Frame: Meteor65 65mm 1S Brushless Frame
  • Motors: 0802SE 19500KV Motor
  • Props: 31mm 3-blade props (1.0mm Shaft)
  • Camera: C02 Micro Camera
  • VTX: Integrates 25mW VTX / M03 25-350mW VTX (only for ELRS 2.4G version)
  • Canopy: Canopy for Micro Camera
  • Battery: BT2.0 300mah 1S Battery
  • Flight time: 3:30min-4min

    BT2.0 Connector

    BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). This means stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A. You can enjoy more flight time without disturb of low voltage warning due to reducing voltage sag. For more instruction

    See the graph below of comparing the BT2.0 connector and PH2.0 connector (solid pin version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this test. The BT2.0 has double the time (about 2 minutes) and a 0.2v improvement in voltage sag.

    Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0

     Meanwhile, we provide 200 sets of BT2.0 300mah 1S battery(2pcs) as a free gift for everybody. Click here to grab BT2.0 battery / connector. 

    Much more choices of BT2.0 series accessories.  
    We know some of pilots might have a question about how to deal with the old PH2.0 1S battery. So we provide some accessories like BT2.0 connectors for those people who want to convert the PH2.0 connector to BT2.0 connector. 

          Flight Controller

          F4 1S AIO FC(SPI Rx) integrates 4 components as F411 FC, 5A ESC, 25mW VTX and SPI receiver. It is ultralight only 3.92g and still maintains an amazing performance capability, which makes it become your best choice to run with a 1S brushless quad! 

          F4 1S AIO FC(No Rx) integrates 3 components as F411 FC, 5A ESC and 25mW VTX. It supports external receivers like TBS Crossfire, Frsky XM+ and Spectrum DSMX etc. 

          In this quad, the Frsky & Futaba Version is equipped with F4 1S AIO FC(SPI Rx), and the TBS & PNP Version is equipped with F4 1S AIO FC(No Rx) with an external Receiver.

              C02 Camera

              C02 Camera is the lightweight camera customized for the weight-sensitive micro whoop drones, perfectly fits the Meteor65. Adapted a 1/4'' CMOS sensor, 2.1mm lens for 1200TVL resolution and excellent latency while minimizing the weight to 1.4g. Packed with the micro canopy, protect your camera well in a hard crash. 

                Motors

                0802SE 19500KV Motor is a lightweight 1S motor, compared with the 0802 series brushless motors, it is not only significantly reduced the weight which is only 1.83g/pc but also ensuring the awesome performance of power and thrust. Lead wire soldered to the PCB, which allows you to repair it easier once it disconnected.

                And the Racing version of Meteor65 is using the 0802 22000KV motors, which uses a ball bearing instead of brass bushings, and PCB connector. More durable and easier to repair once disconnected. 

                Meteor65 Frame

                The lightest lower profile 65mm frame- Meteor65 frame is reduced 0.75g
                to 3.14g only. The battery slot is closer to the center of gravity for a
                smoother flying experience, and you will land on the motor screws instead of the battery. There are more options for colorful frames such as Beta-blue, mint-green, sakura-pink, mango-orange, etc.

                 

                *VR02 FPV Goggles

                VR02 FPV Goggles

                $69.99
                 


                BETAFPV VR02 FPV Goggles - A First-Person-View Goggle that is specially designed for FPV starters. Built-in antenna and only 3 operation buttons, the VR02 goggle is extremely easy to operate. With 4.3 inches 800*480px high brightness LCD, you can experience a bright world without warped and blurred images.

                Bullet Point

                • BETAFPV VR02 FPV Goggles is specially designed for FPV starters. With the built-in antenna and 3 compact operation buttons, the VR02 Goggles maintains a 300g lightweight and easier to operate.
                • With 4.3 inches 800*480px HD high brightness LCD, which is specially tuned for FPV racing or Model airplanes. 
                • Upgraded the Frequency sweep function and the fast frequency auto-search function(Only 2.5 seconds fast frequency search), pilots can easily find a stronger Band to get a better flight experience.
                • Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly.
                • Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand.
                • Come with an advanced auto-searching function and show you the working frequency on screen.

                Specification

                BODY
                • Dimension: 126x143x86.3mm
                • Weight: 300g with 2hr 2000mAh battery
                • Belt: Three-Ways adjustable belt
                SCREEN
                • screen size: 4.3 inch
                • Screen resolution: 800*480 px
                • Screen brightness: 300cd/m2
                • View Angle: 55°
                JACK
                • Type-C Charging
                • Voltage: 3.7V, the device operating current of 500mA@3.7V
                • Current: 500mA
                BATTERY
                • Built-in 3.7V/2000mAh high-capacity polymer battery, LED turn on while charging. When charging is completed, the LED will turn off.
                • Each full charge revive is around 2 hours working time

                Small and Portable

                Comes with BETAFPV patented design, VR02 FPV Goggles cleverly uses optical reflection, bringing a more practical structure. It effectively reduces the goggles' volume, making the goggles become extremely small and portable, greatly enhances the flight experience.

                Band and Channel Selection

                  CH
                CH 1
                (MHZ)
                CH 2
                (MHZ)
                CH 3
                (MHZ)
                CH 4
                (MHZ)
                CH 5
                (MHZ)
                CH 6
                (MHZ)
                CH 7
                (MHZ)
                CH 8
                (MHZ)
                GROUP
                A
                5865
                5845
                5825
                5805
                5785
                5765
                5745
                5725
                B
                5733
                5752
                5771
                5790
                5809
                5828
                5847
                5866
                E
                5705
                5685
                5665
                5645
                5885
                5905
                5925
                5945
                F
                5740
                5760
                5780
                5800
                5820
                5840
                5860
                5880 
                R
                5658
                5695
                5732
                5769
                5806
                5843
                5880
                5917
                L 5362 5399 5436 5473 5510 5547 5584 5621
                • BETAFPV VR02 FPV Goggles has a frequency sweep function and a fast frequency auto-search function, it will help pilots find a stronger Band to get a better flight experience.
                • The frequency sweep function can display the occupancy status of each channel in the current space so that pilots can fly with a better Band and enhance the flight experience.

                How to use the frequency sweep function?

                After powering on, short press the "S" button to enter the sweeping interface, as shown below. Pilots can change the Band via the "Band+" and "Ch+" button.

                Band Status Indicator

                Green 0<RSSI<20, not occupied
                Yellow 20<RSSI<70, there is a drone occupying the Band far away, or there is interference
                Red 70<RSSI<99, occupied
                White current Band (highest RSSI in the sweep result)

                How to use the fast frequency search function?

                After powering on, press and hold the "S" button for 1 second to start the frequency auto-search. The frequency auto-search process is 2.5 seconds. After the frequency auto-search is over, it will beep twice and jump to the corresponding Band of the drone.

                Operation Instructions

                KEY
                • Power On/Off
                Default mode, Flick to the left to turn off, and to the right to turn on, the screen will light up after a normal boot.
                • Band+
                Default mode, Short press for Band+ option A, B, E, F, R, L cycle selection.
                • Search

                Default mode, After powering on, short press the "S" button to enter the sweeping interface. Press and hold the "S" button for 1 second to start the frequency auto-search. 

                • CH+
                Default mode, Short press for CH 1~8 cycles.

                *LiteRadio 2 SE Radio Transmitter

                LiteRadio 2 SE Radio Transmitter is the upgraded version based on LiteRadio 2 and comes with huge improvements.

                • Built-in 1000 mAh 1S battery, LiteRadio 2 SE increases the endurance to 8 hours.
                • Updates with BETAFPV self-developed LiteRadio System. Pilots can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter.
                • Supports the Frsky / Futaba / Bayang, pilots can easily change Futaba, Frsky D8, Frsky FCC D16 and Frsky LBT D16 mode via the radio transmitter.
                • Comes with 100mW transmitting power, LiteRadio 2 SE brings a wider operating range.


                  Bullet Point

                  • LiteRadio 2 SE upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter, which is more convenient for the beginner racer to operate.
                  • Equipped with a built-in 1000 mAh 1S battery, LiteRadio 2 SE can use up to 8 hours, bringing an excellent endurance performance. 
                  • Comes with a built-in charging module, LiteRadio 2 SE can support USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged(when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly. 
                  • Compared with the LiteRadio 2, LiteRadio 2 SE has a larger transmitting power that can reach 100mW, bringing a wider operating range.
                  • Adopted the rubber coat, LiteRadio 2 SE is ergonomic and has the shape of a gaming controller. It's comfortable to hold, and the anti-slip texture on the handles allows for a solid grip.
                  • This radio transmitter acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE.
                  • LiteRadio 2 SE transmitter has been equipped on the Ready-to-Fly FPV whoop racing advanced kit 2 and FPV whoop racing starter kit 2. It is one of the easiest ways to get into the hobby

                    Specification

                    • Item: LiteRadio 2 SE
                    • Color: White
                    • Frequency Range: 2.4G (2403MHz-2447MHz)
                    • 2.4G System: NRF24L01 or CC2500
                    • Channel: 8
                    • Support Protocol: Bayang / Futaba S-FHSS / Frsky FCC D16/ Frsky LBT D16 / Frsky D8
                    • Power: ≤100mw
                    • Adapted Drone Type: Multirotor
                    • Support USB Charging / Firmware Update
                    • Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration
                    • LED Light: Green-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal
                    • Battery: Built-in 1000mAh 1S Battery
                    • Charging Connector: TypeC

                    Comparison of LiteRadio 2 SE and LiteRadio 2

                     LiteRadio 2 SE LiteRadio 2
                    System Customized LiteRadio System Opensource OPENTX
                    Power Built-in 1000mAh 1S Battery Removable 350mAh 2S Battery
                    RF Power 100mW 80mW
                    Working Time 8 Hours 3 Hours
                    Protocols Frsky FCC D16/Frsky LBT D16/Frsky D8/Futaba S-FHSS, Bayang Frsky FCC D16/Frsky LBT D16 /Frsky D8, Bayang
                    Joystick Calibration Yes No(Could with OpenTX Companion)
                    Firmware Update Yes No

                    How to switch the protocol

                    To change protocols (Frsky FCC D16, Frsky LBT D16, Frsky D8, or Futaba S-FHSS), you have to power it off first, then press and hold the bind button while you power it back on. After that, the flash times of the red LED before buzzer alarms will change, and it will indicate which protocol it is on. 
                    LED Status Protocol Version
                    Flash Once Frsky FCC D16
                    Flash Twice  Frsky LBT D16
                    Flash Three Times  Frsky D8
                    Flash Four Times Futaba S-FHSS

                    Diagram of LiteRadio 2 SE

                      FAQ

                      • Manual for LiteRadio 2 SE Radio Transmitter
                      • How to replace the gimbals of Literadio 2 SE?
                      • For any questions about joystick calibration of the Literadio 2 SE transmitter, please watch the following video to know more.

                        Package

                        • 1 * LiteRadio 2 SE Radio Transmitter
                        • 1 * User Manual

                        You recently viewed

                        Clear recently viewed