HL7 7" Long Range Drone with GPS

Save $86.00

Matek FCHUB-A5 w/ Current Sensor 184A, BEC 5V 2A

The Matek FCHUB-A5 w/ Current Sensor 184A, BEC 5V 2A, made to mount the Matek F405-MINI Flight Controller. 

this FCHUB was designed to be paired with the Matek F405 Mini. Together they work as a great combo for any build. Both the FCHUB and F405 Mini can be connected using a flat ribbon cable, which simplifies your build process and takes up less space


  • Brand name: Matek Systems
  • Item name: FCHUB A5
  • Input: 6-27V (2-6S Lipo)
  • Input TVS protection
  • PDB: 4x35A (Max. 4x46A)
  • BEC: 5V 2A (Max. 2.5A)
  • Current sensor: 184A
  • Current scale: 179
  • BLHeli32 ESC telemetry pads
  • Weight: 8g
  • Size: 46x36x4mm
  • Mounting holes: 30.5mm & 20mmφ3mm
  • Ribbon cable connection with FC F405-mini


  • 1 x FCHUB A5

  • 6 x screws M3*11
  • 6 x nylon nuts M3

Matek F405-MINI Flight Controller w/ F405, 32k Gyro, BFOSD, 32M Flash

Matek has miniaturized their already very popular F405 AIO Flight Controller. The F405 Mini was designed to be smaller and lighter than its bigger brother, and the 20x20mm mount allows for more space to work with on your build. This flight controller was designed to be paired with the Matek FCHUB-A5.


  • MCU: 168MHz STM32F405
  • IMU: 32K ICM20602 accelerometer/gyro (SPI)
  • Support 32K Gyro update & 16K PID Loop
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: 32M(256) Flash
  • Built-in inverter for SBUS input (UART2-RX)
  • PPM/UART Shared: UART2-RX
  • SoftSerial & Camera control supported on S5 & S6
  • Battery Voltage Sensor: 1:10
  • Current Sensor: No (FCHUB-A5 option)
  • BEC 5V: No (FCHUB-A5 option)
  • LDO 3.3V: Max.300mA for Spektrum RX
  • I2C1 SDA & SCL available
  • WS2812 Led Strip: Yes
  • Beeper: Yes
  • RSSI: Yes
  • 2x LEDs for FC STATUS (Blue, Red)
  • 6x PWM / DShot outputs without conflict
  • 5x UARTs
  • 1x 14pin top mounted FFC Slot for FCHUB-A5 connection
  • 28x28mm PCB with 20mm mounting holes


  • F405-MINI Flight Controller
  • 6x silicon grommets M4 to M3
  • 6x brass grommets M3 to M2
  • 2x 0.5mm*14Pin 3cm Flexible Flat Cable

Racerstar PGA40 BLHeli_32 40A 2-6s ESC

The Racerstar PGA40 is a 40A 6s capable singular ESC. Equipped with BLHeli_32 and 40 amps of power, this ESC will give you plenty of performance for power hungry quads.

Note: ESC IS soldered with wires and capacitor, unlike photos.


  • Con. current: 40A
  • Max current(10S): 45A
  • LBEC: NO
  • SBEC: NO
  • Lipo: 2-6S
  • Programming: yes
  • Total weight: about 6.2g (without wires or cap)
  • PCB weight: 4.6g (without aluminum part)
  • Aluminum part weight: 1.7g
  • Size (PCB): 43x13.5mm (53mm long with cap)


  • 1x Racerstar PGA40 ESC

T-Motor F40 PRO II

The Tiger Motor F40 PRO II Motor has been designed and built specifically for FPV Racing.

Coming in at only 29.5g, including wires, the F40 PRO II is very light for the power it can dish out. Another amazing feature are the high temperature silver core windings. These windings are able to withstand much higher temperatures than conventional windings. Additionally, the top of the stator has an anti-slip design that keeps your props stable during high intensity flights. 


  • 1x F40PRO II Motor
  • 1x Prop Locknut
  • 4x Socket Head Screws


  • KV: 1600, 1750, 2150, 2400, 2600.
  • Configuration: 12N14P
  • Shaft Diameter: 4mm
  • AWG: 18#
  • Internal Resistance: 42mΩ
  • Motor Dimensions (Dia.*Len): Φ27.9×32mm
  • Weight with wires(g): 29.5g
  • Weight without wires(g): 27g
  • ldle current@10v(A): 1.8A
  • No.of Cells(Lipo): 3-4S
  • Cable length: 100mm

SucceX Force 5.8g 800mW VTX Adjustable


- The output power is stable;

- Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;

- Output 48 frequency points, 

- Frequency lock fast, the boot does not interfere with companions;

- Built-in output power self-check function;

- Full format video format: NTSC /PAL;

- Wide input voltage range. low power consumption:


- Small size:36*36*3mm

- Mounting holes 4-M3

- Lightweight: 7.2g(excluding antenna)


- Item: SucceX-Force 800mW adjustable VTX

- Input voltage:

- Output voltage/ Max current: 5V 1A

- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@500mW, 380mA@800mW

- Output 48 frequency points,

- size:36*36*3mm

- PIT/25mW/200mW/400mW/800mW

Package included:

- SucceX-Force 800mW adjustable VTX x1pc

- cables  x 1set

HL7 V2.1 FPV 7" Long Range Frame



Strengthen the strength of the top and bottom plates

- Super long battery support room (40*110mm)
- 40*110*26mm Electronics mounting space
- Scientific frame structure & reasonable force analysis ensure durability while mitigating the jello issues
- Comes with 30° Gorpo Mounting Plates
- Equipped with 3D print 45° TPU antenna mount, Optional TPU arm protection mount, GoPro mount


- Wheelbase: 296mm
- Bottom Plate Thickness: 2mm
- Top Plate Thickness: 2mm
- Arm Thickness: 5mm
- Vertical Plates Thickness: 3mm
- Vertical Plates Distance: 28mm
- Standoff Height: 22mm
- The distance between Top&Bottom Plates: 26mm
- FC Mounting Hole: 30.5*30.5mm/20*20mm
- Frame Net Weight:143
- Supported Motor:22XX 23XX 24XX 25XX Size
- Supported Propeller:Max 7 Inch

Package included:

- 1 x Complete Frame Kit
- 1 x Screw, standoff accessory bag
- 1 pc x antenna mount

RDQ BN-880 Flight Control GPS Module Dual Module Compass With Cable

Power Supply:DC Voltage 2.8V~6.0V,Typical:3.3V or 5.0V
Consumption:Capture 50mA@5V
Receiving Format:GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
Receiving Channel:72 Searching Channel
Receiving Sensitivity:Trace -167dBm
Positioning Time:Cold Start:avg26s
                               Warm Start:avg25s
                               Hot Start:avg3s
Level Positioning Precison:2m At Open Wind
Output Frequency:1Hz-10Hz,Default 1Hz
Speed Precison:0.1 m/s (Without Aid)
Acceleration Precison:0.1 m/s (Without Aid)
Dynamic Characteristics:Max Height:18000m
                                             Max Speed:5153m/s
                                             Max Acceleration:4G
UART Interface:UART Port:TXDA and RXDA
                            Support Rate:4800bps to 115200bps,Default 38400dps
Working Temperature:-40℃-+85℃
Storage Temperature:-40℃-+85℃
Size:28mm x 28mm x 10mm
The Module’s Pins:SDA,GND,TX,RX,VCC,SCL
GPS Module,Dual Module Compass
With electronic compass IC HMC5883L
1.25mm spacing between the 6pins patch seat

Package Includes:

  • 1x BN-880 GPS Module 
  • 1x 15cm Cable
  • 1x 3M double sided tape square

Foxeer Falkor Mini 1200TVL 1.8mm FPV Camera

The Falkor Mini is a mini FPV camera that checks all the boxes for a solid FPV camera. 1200TVL resolution boasts clear images through your goggles. The switchable 4:3/16:9 aspect ratio, as well as the wide voltage range of 5-40V, provide a wide range of compatibility with almost any pair of goggles.


  • Size: 1.8mm
  • Sensor Type: CMOS 1/3
  • Scale: 4:3 / 16:9 Switchable
  • TV System: PAL / NTSC Switchable
  • Resolution: 1200TVL
  • Shutter Speed (CCD IRIS): PAL: 1/25 ~ 1/10000 sec; NTSC: 1/30 ~ 1/10000 sec
  • Video Out: CVBS
  • Min. Illumination: 0.01Lux
  • White Balance: Auto
  • DNR: 3DNR
  • WDR: 100db
  • Day/Night Shift: EXT/Auto/Color/B&W
  • Flight OSD: Voltage/Cam Title/Time
  • Power Requirement: DC 5V ~ 40V
  • Language: English/Pyccknn/Espanol/Italiano/Francais/Polskzm/Portugues/Japanese 
  • Working Temperature: -10℃ ~+50℃ RH90% Max
  • Working Humidity: 20~80%
  • Storage Temperature: -20℃ ~ +70℃
  • Storage Humidity: 20~95%
  • Dimension: 21.8x21.8mm(without bracket)
  • Weight: 8.7g


  • 1x Foxeer Falkor camera
  • 1x Servo cable to Foxeer ClearTX VTX
  • 1x Servo cable to TBS Unify VTX
  • 1x 2pin OSD cable
  • 1x OSD Board
  • 2x Bracket
  • 1x Manual
  • 1x Screws set

You recently viewed

Clear recently viewed