Martian 5" FlightOne Freestyler

Save $80.49
$369.99
$289.50

Martian II 220 220mm 4mm Arm Thickness Carbon Fiber Frame

Specification:
Brand name: MartianⅡ
Item name: 220 220mm Frame Kit 
Wheelbase: 220mm
Material: Carbon fiber
Arm thickness: about 4mm
Thickness of top plate: about 1.5mm
Thickness of bottom plate: about 2mm
Weight: 155g

SMA Circular Polarized FPV Mushroom Antenna

M1 TX/RX SMA Male Circular Polarized FPV Mushroom Antenna 

This thoughtfully designed circular polarized antenna utilizes mushroom protective case to protect elements inside, which can outperform typically fragile wire elements. The antenna greatly improve the range and covering video transmitting and receiving system. Circular Polarized Antenna can reduce interference. For best performance we recommend using it as matched set. 

Gain:5dBI, Frequency Range:5.8GHz 
Max Power:50W 
Connector: SMA Male 
Stable signal transmission 
Polarization:Circular polarization (RHCP) 

Racerstar PGA40 BLHeli_32 40A 2-6s ESC

Specifications

  • Con. current: 40A
  • Max current(10S): 45A
  • LBEC: NO
  • SBEC: NO
  • Lipo: 2-6S
  • Programming: yes
  • Total weight: about 6.2g (without wires or cap)
  • PCB weight: 4.6g (without aluminum part)
  • Aluminum part weight: 1.7g
  • Size (PCB): 43x13.5mm (53mm long with cap)

SMA to UFL Cable

Specifications

  • Product Name: SMA to UFL Pigtail Cable
  • Connector Type: SMA to UFL Female
  • Length: 25mm
  • Color: Gold Tone (connector), Black(cable)
  • Weight: 3g
  • Insulation: PTFE (Teflon)

FlightOne RevoltOSD Lite flight controller

The FlightOne RevoltOSD Lite flight controller is the most advanced, performance driven, flight controller ever designed. The Revolt uses a powerful F405 MPU, accompanied with the High Speed Invensense  20602 gyro, allows it to take full advantage of FlightOnes efficient code to run at 32KHz for the best Performance possible.

Hypetrain Stingy 2207 2150kv Motor v1

SPECIFICATIONS

  • Stator diameter: 22 mm
  • Stator height: 7 mm
  • Kv: 2150
  • Bearings: EZO 9x4x4
  • Weight: 32 grams
  • Wire Length: 118 mm
  • Shaft size: M5
  • Mounting Screw Pattern: 16×16 mm
  • Input Voltage: 3-6S

Caddx Turbo Micro S1 NTSC FPV Camera

Specifications

  • Image Sensor: 1/3" CCD Sensor
  • Horizontal Resolution: 600 TVL
  • TV System: NTSC/PAL non-changeable
  • Synchronization: Internal
  • Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
  • S/N Ratio: >60dB (AGC OFF)
  • Video Output: CVBS
  • Lens: 2.1mm(Default)/ 2.3mm
  • Min. Illumination: 0.01Lux@F1.2
  • Auto Gain Control: YES
  • BLC: YES
  • Camera OSD: YES
  • Voltage OSD: NO
  • WDR: D-WDR
  • DNR: 2 DNR
  • Day/Night: Auto/Color/B&W
  • Dimensions: 19mm*19mm*19mm
  • Wide Power Input: DC 4.5-40V
  • Work Temperature: -20℃~+60℃
  • Work Humidity: 20%~80%
  • Weight: 6.2g (N.W.)/ (G.W.)

AKK FX5 5.8Ghz 40CH 25mW/100mW/200 mW Switchable FPV Transmitter come with built in OSD

Features: 

  • 25mW, 100mW and 200mW power switchable
  • One button frequency and power setup
  • Built in OSD
  • Super light weight

FrSky XM Plus Ultra Mini Receiver ONLY 1.6g

Specification:

  • Dimension:21.5x12x3.5mm(LxWxH)
  • Weight: 1.6g
  • Number of Channels:Up to 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC)
  • Operating Voltage Range:3.7~10V
  • Operating Current:30mA@5V
  • Operating Range:FULL range
  • With RSSI output on board:Analog 0~3.3V
  • Firmware Upgradeable
  • Compatibility:FrSky D16 mode

 

You recently viewed

Clear recently viewed