Proton 5" Racer

$245.50

This is a custom-built 5" racer using the FPV Flight Club Proton frame and the Emax F4 Magnum 2 stack with high-performance T-Motor F-40 motors and the Runcam Robin camera! Comes completely built, just add props and your antenna and connect to your radio to fly!

 

6 in 1 Main Board - F4 FC + Betaflight OSD + LC Filter + 5v Regulator + Blackbox + Buzzer  

The heart of the flight control systems is a powerful STM32F405 MCU and MPU6000 gyro flashed with Betaflight for proven rocksteady flight stability. The integrated LC filter with 5v/3A voltage regulator means clean power for all the FC/OSD components and other attached boards such as VTX, RX and FPV Camera. Betaflight OSD with easily customizable layout of vital flight information and ability to change FC flight parameters. Blackbox flight log recorder with 16mb flash memory. On board buzzer for battery level warning or lost model finder functions.

 

 

48 Chanel 5.8ghz Switchable Power VTX Board

VTX allows for easy change of vtx channel/band via push button.  Also transmit power is switchable from 25mw to 200mw. Included is a lightweight 5.8ghz dipole whip antenna or 80mm extension cable with SMA connecter for use with your own antenna.

 

Frsky XM 16ch Sbus Micro RX Board

Genuine FrSky XM receiver is included with 16 channels (capable of RSSI function with software update from Frsky). It possible to connect other brands of Serial or PPM via the dedicated RX pads.

 

Bullet 30A - 4 in 1 ESC + Current Sensor Board

 

The ESC system is comprised of 4 x 30A continuous Bullet ESC’s using top quality MOSFETs and running Blheli S firmware. Your choice of protocol: DSHOT, Multishot, Oneshot 125. The onboard current sensor monitors mAh consumed and pass the information to OSD for an accurate way to monitor battery level and peak power consumption. 

Emax F4 Magnum AIO FPV Stack

 Specification​s:

 

6 in 1 Main Board
Flight controller OMNIBUSF4 Firmware
STM32F405 MCU
MPU6000 accelerometer/gyro (connected via SPI)
On-board Betaflight OSD 
On-board Buzzer 
Integrated 5V/3A BEC
Integrated LC Filter 
Dedicated PPM/ Sbus receiver input
On-board high-capacity 16mb black box flight log recorder

3 UART pads

Addressable LED pad


VTX Board
Frequency band:5362-5945MHz
Channels: 48 ( Need band/channel chart ) 
Transmit power:Switchable 25/200mw
Supply voltage:4.5V-5.5V
Antenna port :50Ω ipx ufl connector

Antenna: 1pc lightweight 5.8g dipole 100mm whip

               1pc. SMA extension 80mm length


4 in 1 ESC and Current Sensor Board
Continuous current 30A and 40A burst per motor
Supply voltage 2-4S Lipo
Silabs EFM8BB21F16G 50mhz MCU 
BLHeli-S firmware

Supports DSHOT, MULTISHOT,ONESHOT125
Top quality MOSFET (Brand)
3oz high TG PCB board
On-board current sensor

Receiver Board
Genuine FrSky XM+ receiver

D16 Mode

16 channel SBUS

RSSI on Channel 15

You recently viewed

Clear recently viewed