QAV-PIKO 2" Micro Kit

Sold out

QAV-PIKO 2" Micro Quadcopter (2s-3s)

The QAV-PIKO 2" Micro FPV Quadcopter is a true x micro FPV frame. It was built using premium Lumenier carbon fiber that is super smooth and will take a beating. The frame focuses on symmetry and the QAV-PIKO takes advantage of this by using a standard 20x20 stack as part of the frame structure. This results in an ultralight, very clean and simple build! The kit comes with a 30cm long silicone tube that is meant to be cut into standoffs. The silicone serves two purposes, one, you are able to cut them to the exact height you want, and two, they serve as a "soft mount" for your electronics, giving you less vibration to your FC.

The frame features a solid 2mm thick main plate and 1.5mm top plate and side plates to protect your FPV camera. The side plates slip into slots on the top plate for a press fit while the included long screws will thread all the way through the main plate through your FC and ESC stack, to the top plate.

The PIKO 2" was designed to work with FPV Micro Camera / VTX combos. The camera has a built-in VTX and is able to be tilted to any angle because of the way it is mounted to the frame. Apply the included rubber side wall adhesives to the verticle side plates and the camera fits snugly in place. You can also use different FPV cameras, but you may have to add / remove foam/rubber to mount it just the way you want it.

The QAV-PIKO mounts batteries on the bottom and comes with a LiPo pad and a rubber band to secure your battery to the bottom of the quad. The kit also comes with an XT-30 cable so you can use your high powered batteries.

The QAV-PIKO 2" is able to run up to 2" props to give you some insane thrust for something this small.

T-Motor F10 1104 7500KV Motor

The Tiger Motor F10 series may be small in size, but they are large in power! With the micro class growing in the FPV world, TMotor couldn't resist making their own micro motor.

Matek F405-MINI Flight Controller w/ F405, 32k Gyro, BFOSD, 32M Flash

Matek has miniaturized their already very popular F405 AIO Flight Controller. The F405 Mini was designed to be smaller and lighter than its bigger brother, and the 20x20mm mount allows for more space to work with on your build. 

Racerstar Tattoo_S Mini 12AX4 12A STM32F051 BLheli_32

Con. Current: 12A
Peak Current(10s): 16A
Chip: ST/ARM

Lipo: 2-4S


BS2 Cmos AIO FPV Camera with OSD interface

LiteRadio 2

After the latest round of beta test, LiteRadio 2 is back to the market with the huge improvements based on the original version.

  • Supports Frsky protocol, easily change Frsky D8, Frsky D16 FCC and Frsky D16 LBT mode (The default version is Frsky D16 FCC)
  • Built-in charging module, support USB charging 
  • Adopted the rubber coat and add weight, makes it more ergonomic
  • Add vibration motor, provide a vibrating prompt
  • Redesign the power button, make it crystal clear and better for the LED indication

LiteRadio 2 Radio Transmitter User Manual

    Bullet Point

    • Designed for FPV racing starters, and supports Bayang protocol and Frsky protocol (D16/ D8)
    • LiteRadio 2 is powered by OpenTX firmware. Totally 8 channels and has a hobby grade gimbal. 
    • This radio tansmitter acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulator like EREADRONE
    • The trainer function is available for this LiteRadio 2 transmitter. It is useful for FPV racing student in training
    • LiteRadio 2 transmitter runs the OpenTX 2.2.4 firmware. OpenTX comes with a computer-based graphical user interface, OpenTX Companion. Pilots could use OpenTX Companion is trim the gimbal central value
    • With the hobby grade gimbal and adopted the rubber coat, makes it more ergonomic


      • Item: LiteRadio 2
      • Frequency Range: 2.4G (2403MHz-2447MHz)
      • 2.4G System: NRF24L01 or CC2500
      • Channel: 8
      • System: Bayang Protocol / Frsky Protocol 
      • Power: ≤80mw
      • Model Type: Multi-rotor
      • Support USB Charging
      • Support FPV Simulator Connected
      • Output: PPM, support Student Radio Mode
      • LED Light: Green-Power On / Red-Warning / Blue-Normal
      • Battery: 350mAh 2S Battery
      • Weight: 227.4g (with battery)

          How to change the protocol (D16/D8 Version)

          Press and hold the bind button, then press the power button until the purple light is flashing. The flashing LED indicates different protocol the LiteRadio works on.
          LED Status Protocol Version
          Flash Once Frsky D16 FCC
          Flash Twice  Frsky D16 LBT
          Flash Three Times  Frsky D8

          Diagram of LiteRadio 2

          LiteRadio 2 Guide

          Manual for LiteRadio 2 Radio Transmitter
          LiteRadio Configuration - OpenTX Companion


          • 1 * LiteRadio 2 Radio Transmitter
          • 1 * 350mAh 2S Battery



          BETAFPV VR01 FPV Goggles

          BETAFPV VR01 FPV Goggles - a First-Person-View Goggle with 4.3 inch 800*480px HD high brightness LCD which will allow you to experience a bright world without warped and blurred images. Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, comfortable like as cotton and suitable for all age ranges.

          Bullet Point

          • BETAFPV VR01 FPV Goggles is with 4.3 inch 800*480px HD high brightness LCD, which is specially tuned for FPV racing or Model airplane. 
          • Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly.
          • Buit-in super sensitiveness 5.8GHz 40ch receiver,especially with RaceBand.
          • Come with advanced auto-searching function and show yout the working frequency on screen.
          • 92% transparent lens adopted ,no distort,no blur on the adage of screen.
          • Light weight 375g with 2hr 2000mAh battery, RTF for any scale, racing, Model airplane game.



          • Dimension: 155x144x113mm
          • Weight: 375g with 2hr 2000mAh battery
          • Belt: three-Ways adjustable belt


          • screen size: 4.3 inch
          • Screen resolution: 800*480 (No blur after enlarge by the lens)
          • Screen brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV
          • View Angle: 12 O’CLOCK


          • 2.8x boost of the video to acquire intense feel-in-there video
          • 92% transparent rate no distort of light


          • Input CVBS
          • Headphone sound output
          • TF Card(C10) Max32G
          • USB DC5V IN, the device operating current of 550mA@5V,built-in battery maximum charge current of 750mA@5V; if the device is working when charging, please pay attention to selecting the rated current greater than 2A/5V charging equipment


          • Built-in 3.7V/2000mAh high-capacity polymer battery, when the battery is charging, the device the red LED will light when charging is completed, here are bright green LED
          • Each full charge revive is around 2 hours working time

          Band and Channel Selection


          CH 1
          CH 2
          CH 3
          CH 4
          CH 5
          CH 6
          CH 7
          CH 8

          Operation Instructions

          • K1>SearCH/AV
          Default mode, Short press for automatically search signals to a certain signal strength and stops on that channel; Long press switch RF MOD and Long press for AV MOD; In Play mode, pressed jump volume adjust OSD.
          • K2>MENU/Power
          Default mode, Short press for MENU OSD; Long press 3S for Power OFF/ON; MENU pressed, this button is use as the Return.
          • K3>REC/Play/OK
          Default mode, Short press for recording /STOP; Long press for Play mode; MENU pressed, this button is use as the confirmed.<
          • K4>Band+/VOL+
          Default mode, Short press for Band+ option A,B,D,E,F,R cycle selection; Long press for Volume control -; MENU pressed, this button is use as the UP.
          • K5>CH+/VOL-
          Default mode, Short press for CH 1~8 cycles; Long press for Volume control +, MENU pressed, this button is use as the DOWN.


            • Call MENU and select Playback (Short Press K1 button to call menu, and use K3 button to select Playback mode; Or long pressed K3 )
            • Review/Replay in Playback mode (Playing Short K1 jump volume adjust OSD)
            • Buttons have different function in playback mode
            • Record file: AVI, 800*480px progressive
            • Support up to 32G TF card (C10 recommend)
            • K2: Playback menu (volume control/file delete/protect)
            • K4: UP/ fast backward<<
            • K5: DOWM/ fast backward>>
            • K3: Select/Play/ Pause
            • K1: Quit Playback mode
            NOTE: If the device is not used for a long time, please charged once every four months, inorder to protect the battery.


            • 1 * BETAFPV VR01 FPV Goggles
            • 1 * USB Charging Cable
            • 2 * Dipole 5.8G Antennas  
            • 1 * Adjustable Headband

            You recently viewed

            Clear recently viewed