Ready to Fly Sapphire Star 5" Freestyle Drone with Radio

$445.49

Sapphire Star 5" Freestyle Drone with Taranis X9 Lite Radio, just add batteries to fly!

Emax “F4 Magnum” All in One FPV Electronics Stack 

This tightly integrated systems packs the FC, ESC, RX, VTX, PDB, CURRENT SENSOR and OSD into neatly stacked boards that can be easily serviced or upgraded. The pinned board interconnects offer a clean wire free look and the compact stack can fit even the tightest builds with easy.

 

We have carefully combined some of the best FVP technology in our arsenal into a tightly pre-assembled package that offers the fastest way go from starting a new build to FPV Flight!

 

6 in 1 Main Board - F4 FC + Betaflight OSD + LC Filter + 5v Regulator + Blackbox + Buzzer  

The heart of the flight control systems is a powerful STM32F405 MCU and MPU6000 gyro flashed with Betaflight for proven rocksteady flight stability. The integrated LC filter with 5v/3A voltage regulator means clean power for all the FC/OSD components and other attached boards such as VTX, RX and FPV Camera. Betaflight OSD with easily customizable layout of vital flight information and ability to change FC flight parameters. Blackbox flight log recorder with 16mb flash memory. On board buzzer for battery level warning or lost model finder functions.

 

 

48 Chanel 5.8ghz Switchable Power VTX Board

VTX allows for easy change of vtx channel/band via push button.  Also transmit power is switchable from 25mw to 200mw. Included is a lightweight 5.8ghz dipole whip antenna or 80mm extension cable with SMA connecter for use with your own antenna.

 

Frsky XM 16ch Sbus Micro RX Board

Genuine FrSky XM receiver is included with 16 channels (capable of RSSI function with software update from Frsky). It possible to connect other brands of Serial or PPM via the dedicated RX pads.

 

Bullet 30A - 4 in 1 ESC + Current Sensor Board

 

The ESC system is comprised of 4 x 30A continuous Bullet ESC’s using top quality MOSFETs and running Blheli S firmware. Your choice of protocol: DSHOT, Multishot, Oneshot 125. The onboard current sensor monitors mAh consumed and pass the information to OSD for an accurate way to monitor battery level and peak power consumption. 

Emax F4 Magnum AIO FPV Stack

 Specification​s:

 

6 in 1 Main Board
Flight controller OMNIBUSF4 Firmware
STM32F405 MCU
MPU6000 accelerometer/gyro (connected via SPI)
On-board Betaflight OSD 
On-board Buzzer 
Integrated 5V/3A BEC
Integrated LC Filter 
Dedicated PPM/ Sbus receiver input
On-board high-capacity 16mb black box flight log recorder

3 UART pads

Addressable LED pad


VTX Board
Frequency band:5362-5945MHz
Channels: 48 ( Need band/channel chart ) 
Transmit power:Switchable 25/200mw
Supply voltage:4.5V-5.5V
Antenna port :50Ω ipx ufl connector

Antenna: 1pc lightweight 5.8g dipole 100mm whip

               1pc. SMA extension 80mm length


4 in 1 ESC and Current Sensor Board
Continuous current 30A and 40A burst per motor
Supply voltage 2-4S Lipo
Silabs EFM8BB21F16G 50mhz MCU 
BLHeli-S firmware

Supports DSHOT, MULTISHOT,ONESHOT125
Top quality MOSFET (Brand)
3oz high TG PCB board
On-board current sensor

Receiver Board
Genuine FrSky XM+ receiver

D16 Mode

16 channel SBUS

RSSI on Channel 15

Please Note: Set Current scale on Betaflight to 240 for better results on Mah draw.

Emax RS2306 Motor at 2400kv

-2kg Thrust from a 2306 class motor!
-Larger Stator for smooth, responsive power.
-BEEFY 4mm Hardened and Tempered Hollow Steel Shaft: Breaking shafts are a thing of the past.
-0.15mm High Silicon-Steel Laminations: Higher volume of silicon increases electrical resistance in the lamination, reducing eddy-currents within the system (Translates electrical energy into mechanical energy more efficiently.). 
-High quality 4mm Inner Diamter Steel Ball Bearings.
-1.8mm N48SH Arc magnets (thinner and lighter which allow lower mass on the outer portion of the bell, resulting in faster acceleration. Less energy lost and more power delivered to the propeller).
-Special Edition Matte White Bell.
-Hex head bell fastener for easy servicing or bell replacement.
-PROPLOCK base for future performance-matched propellers: This anti-slip design locks in the propellers on to the motor to prevent Prop slippage during the hardest obstacle strikes.
-34 grams - Contrary to what most pilots say about motor weight Lighter is not always better. In this class of a motor that pushed 1,000s of grams of thrust, 34g is the absolute minimum without compromising structural integrity.

RunCam Robin

The RunCam Robin XILO Edition Micro FPV Camera is lightweight, budget friendly FPV camera. The Robin was designed to have super low latency (6ms), clear picture, and a WDR (wide dynamic range) even better than the RunCam Eagle. (120dB of range!)


Taranis X9 Lite Radio

The X9 Lite is the latest 2.4G radio from FrSky. Reminiscent of the legendary X9D, the X9 Lite keeps the same form factor and stick layout that so many pilots have come to love, but for a fraction of the price. Additionally, a side-scrolling wheel has been added for easy navigation of the menus on the X9 Lite. 

As a portable radio, the FrSky Taranis X9 Lite is a remarkable fusion of traditional radio design with the innovations of the latest ACCESS protocol. For beginners, the wired training function is retained, allowing beginners to improve their skills with the security of an instructors input upon command.

Like the Taranis X-Lite Pro, the new Taranis X9 Lite also uses the latest ACCESS communication protocol, along with ErskyTX / OpenTX open source operating system, it boasts 24 channels with a faster baud rate and lower latency with a high-speed module digital interface. Additional ACCESS features like wireless firmware updates and wireless configurations will be gradually unlocked, providing a more reliable, more secure link between the remote and model. Making the X9 Lite a fully functioning remote control with tons of extra features.

The X9 Lite is so affordable yet full-featured, you'll never have to choose between unknown and unreliable radios again!

Note: The 18650 battery tray lines up the batteries lengthwise - meaning your 18650 batteries need to be capped to make a connection to each other. If you are using flat ended batteries, you can place a small conductive piece of metal such as copper in between to make a connection.

Features

  • Ergonomic and compact design
  • Installed with ACCESS protocol
  • Supports spectrum analyzer function
  • High-speed module digital interface
  • G7 Noble potentiometer gimbal
  • Supports wired training function
  • Haptic vibration alerts and voice speech outputs
  • Easily accessible battery compartment (*Batteries not included, adaptive with replaceable 18650 button top Li-ion batteries)

Specifications

  • Dimension: 184*170*101mm (L*W*H)
  • Weight: 505g (without battery)
  • Operating system: ErskyTX / OpenTX
  • Number of channels: 24 channels
  • Internal RF module: ISRM-N
  • Operating voltage range: 6.0~8.4V
  • Operating current: 190mA@7.4V
  • Operating Temperature: -20℃ ~ 60℃ (-4℉ ~ 140℉)
  • Backlit LCD resolution: 128*64
  • Model memories: 60 models (expandable by Micro SD card)
  • Smart Port, Micro SD card slot, Micro USB Port and DSC Port



You recently viewed

Clear recently viewed