RTF Tiny Trainer Kit

$599.99

T8 PRO

T8 PRO SPECIFICATIONS

RF Module:  Multi-Protocol Module Compatible Single chip (CC2500)

Size:  160*130*60mm

Weight:  266g

Frequency:  2.400GHZ-2.480GHZ

RF Module:  Multi-Protocol Module Compatible Single chip (CC2500)

Protocol Options:  All CC2500 – Frsky, S-FHSS, RadioLink, Graupner HoTT and more*

Transmission power:  20dbm

Antenna gain: 2db

Range:  > 1km @ 20dbm (depending on the receiver)

Battery:  Built in 3.7v 1000mah Lithium battery

Charging:  Built in USB-C charging

Firmware:  OpenTX - Multiprotocol-TX-Module

Channels:  Up to 16 channels (depending on the model / receiver)

Screen:  Clip on 128x64 LCD and OpenTX control module

Gimbal:  High-precision quad ball bearing HALL Sensor gimbal

Voice support:  Yes (SD Card required)

 

IN THE BOX



 

 

iFlight FPV Goggles with DVR Function

PRODUCT DESCRIPTION

Specification:

Frequency: 40CH 5.8GHz

Built-in battery: 3.7V/2000mAh Battery

Size: 155*144*113mm

Weight: 295g with 3.7V 2000mAh battery

Headband: 3-Sided Adjustable Headband

Screen size: 4.3 Inch

Resolution: 800*480 (no blur after enlarge by the lens)

Brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV

TF card: support up to 32G

 

Main Feature:

With DVR function video recording, picture saving

High brightness 4.3 inch LCD specially turned for FPV racing or Model airplane.

Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand includes race frequency.

Come with advanced auto-searching function ad show you the working frequency on screen.

Built-in 3.7V/2000mAh battery, each full charge revive around 3.5 hours working time. 3.5 hours working time.

Ergonomic design fit your faces.

92% transparent lens adopted, no distort, no blur on the adage of screen;

Light weight 295g with 3hr 2000mAh battery, RTF for any scale, racing, Model airplane game

 

Package Included:

1 * FPV Goggles

2* Albatross RHCP 5.8GHz RP-SMA FPV Antenna

1 * Video Cable

1 * USB Charging Cable

1 * Carrying case

 

BNF Tiny Trainer (Frsky)

SucceX Micro F4 V2.1 15A 2-4S Flight Tower System

SucceX Micro F4 V2.1 Flight Controller

-STM32F411

-Input voltage 2-4S LIPO

-Gyro: MPU6000

-2x UART ports

-4x motor outputs

-Betaflight OSD :AT7456E

-Blackbox FLASH: 8MB

-BEC 5V 2.5A cont.

-Size: 21mm*21mm

-Mounting holes distance: 16*16mm

-Weight: 2.5g

-Firmware : IFLIGHT_F411_PRO

SucceX Micro 15A 4-in-1 ESC(w/plug)

-Firmware: G-H-30 BLS 16.7 -Input voltage : 2-4S LIPO

-Continuous current: 15A

-MCU: BB21F16G

-BEC: NO

-Current sensor: yes

-ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.

-Size: 30mm*22mm

-Mounting hole 16*16mm

-Weight: 3.6g


5.8G 200mW Micro VTX

-Power: PIT/25/100/200mW

-Antenna interface: IPEX (UFL)

-VTX protocol : IRC Tramp

-Size: 17mm*27mm

-Mounting holes: 16*16mm

-Weight: 1.6g

Package Included:

1 x SucceX Micro F4 V2.1 Flight controller (M3 hole)

1 x SucceX Micro 15A Brushless ESC (w/plugs,M3 hole)

1 x PIT/25/100/200mW VTX (M3 hole)


Replacement parts: (NOT INCLUDED)

Replacement 4 in1 ESC

Replacement 200mw VTX

TinyTrainer Frame Kit

The TinyTrainer was developed for Evan “Headsup” Turner to practice flying big drones in his little backyard but became so much more. The flight characteristics of this drone, with the recommended build, result in a racing experience only found in the PRO FPV racing leagues.

Frame supports 16 x 16 stacks and 25 mm toothpick AIO boards. Supports both 9mm and 12mm mounting pattern motors.

Package includes:

  • Qty 1 Tiny Trainer 2mm Carbon Frame
  • Qty 1 TPU Parts Set (Cam Mount, Battery Tray, Fin, vtx mount)
  • Qty 1 Smoked Black Poly-carbonate canopy
  • Qty 8 6 mm M2 Button Head Hex Drive Screw
  • Qty 4 16 mm  M2 Button Head Hex Drive Screw
  • Qty 8 M2 nylon Nuts
  • Qty 4 16 mm M2 Standoffs
  • Qty 8 4″ Nylon Cable Ties

Analog FPV Camera Caddx Ant

Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera

BLACK 4:3

Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera

Specification

Model

Caddx Ant

Image Sensor

1/3" CMOS Sensor

Horizontal Resolution

1200 TVL

TV System

NTSC or PAL 

MENU

Support

IMAGE

16:9 or 4:3

Synchronization

Internal

Electronic Shutter

PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio 

>52dB (AGC OFF)

Video Output

CVBS

Lens

1.8mm

Min. Illumination

0.001Lux@F1.2

Auto Gain Control

YES

BLC

YES

WDR

Global WDR

DNR

3D DNR

Dimensions

14*14mm(with bracket to 19*19mm)

Wide Power Input

DC 3.7-18V

Work Temperature

-20℃~+60℃

Work Humidity

20%~80%

Weight

 2g (N.W.)

RETAIL PRICE

$14.9

 

Packing List

 

Camera x1

3pin FPV silicone cable x1

Warranty card x1

Expend bracket x1

Screws x 4

 

TinyTurners | 1404 4533KV TinyTrainer Motors

1404 4533kv

9mm mounting pattern

2mm shaft

Manufactured by Xnova

Ultra Light FrSky XM Receiver up to 16CH

  • Non-EU

 

Total Package Included:

1 BNF Tiny Trainer (Frsky)

FPV Goggles with DVR

T8 PRO Radio

*Batteries not included

You recently viewed

Clear recently viewed