After the latest round of beta test, LiteRadio 2 is back to the market with the huge improvements based on the original version.

• Supports Frsky protocol, easily change Frsky D8, Frsky D16 FCC and Frsky D16 LBT mode (The default version is Frsky D16 FCC)
• Built-in charging module, support USB charging 
• Adopted the rubber coat and add weight, makes it more ergonomic
• Add vibration motor, provide a vibrating prompt
• Redesign the power button, make it crystal clear and better for the LED indication

LiteRadio 2 Radio Transmitter User Manual

Bullet Point

• Designed for FPV racing starters, and supports Bayang protocol and Frsky protocol (D16/ D8)
• LiteRadio 2 is powered by OpenTX firmware. Totally 8 channels and has a hobby grade gimbal. 
• This radio tansmitter acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulator like EREADRONE
• The trainer function is available for this LiteRadio 2 transmitter. It is useful for FPV racing student in training
• LiteRadio 2 transmitter runs the OpenTX 2.2.4 firmware. OpenTX comes with a computer-based graphical user interface, OpenTX Companion. Pilots could use OpenTX Companion is trim the gimbal central value
• With the hobby grade gimbal and adopted the rubber coat, makes it more ergonomic

Specification

• Item: LiteRadio 2
• Frequency Range: 2.4G (2403MHz-2447MHz)
• 2.4G System: NRF24L01 or CC2500
• Channel: 8
• System: Bayang Protocol / Frsky Protocol 
• Power: ≤80mw
• Model Type: Multi-rotor
• Support USB Charging
• Support FPV Simulator Connected
• Output: PPM, support Student Radio Mode
• LED Light: Green-Power On / Red-Warning / Blue-Normal
• Battery: 350mAh 2S Battery
• Weight: 227.4g (with battery)

How to change the protocol (D16/D8 Version)

Diagram of LiteRadio 2

LiteRadio 2 Guide

Package

• 1 * LiteRadio 2 Radio Transmitter
• 1 * 350mAh 2S Battery

VR01 FPV Goggles with DVR

BETAFPV VR01 FPV Goggles - a First-Person-View Goggle with 4.3 inch 800*480px HD high brightness LCD which will allow you to experience a bright world without warped and blurred images. Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, comfortable like as cotton and suitable for all age ranges.

Bullet Point

• BETAFPV VR01 FPV Goggles is with 4.3 inch 800*480px HD high brightness LCD, which is specially tuned for FPV racing or Model airplane. 
• Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly.
• Buit-in super sensitiveness 5.8GHz 40ch receiver,especially with RaceBand.
  
• Come with advanced auto-searching function and show yout the working frequency on screen.
• 92% transparent lens adopted ,no distort,no blur on the adage of screen.
• Light weight 375g with 2hr 2000mAh battery, RTF for any scale, racing, Model airplane game.

Specification

BODY

• Dimension: 155x144x113mm
• Weight: 375g with 2hr 2000mAh battery
• Belt: three-Ways adjustable belt

SCREEN

• screen size: 4.3 inch
• Screen resolution: 800*480 (No blur after enlarge by the lens)
• Screen brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV
• View Angle: 12 O’CLOCK

LENS

• 2.8x boost of the video to acquire intense feel-in-there video
• 92% transparent rate no distort of light

JACK

• Input CVBS
• Headphone sound output
• TF Card(C10) Max32G
• USB DC5V IN, the device operating current of 550mA@5V,built-in battery maximum charge current of 750mA@5V; if the device is working when charging, please pay attention to selecting the rated current greater than 2A/5V charging equipment

BATTERY

• Built-in 3.7V/2000mAh high-capacity polymer battery, when the battery is charging, the device the red LED will light when charging is completed, here are bright green LED
• Each full charge revive is around 2 hours working time

Band and Channel Selection

Operation Instructions

PLAYBACK

Package

• 1 * BETAFPV VR01 FPV Goggles
• 1 * USB Charging Cable
• 2 * Dipole 5.8G Antennas  
• 1 * Adjustable Headband